Reverse Osmosis System
RO 600 (Item No.:80541)
Product details
Reverse osmosis units create the optimal supply water for marine water and freshwater aquaria. Many water problems can often only be resolved by using reverse osmosis water. Reverse osmosis units use the principle of physical filtration. Unlike ion exchangers, for example, which exchange ions (e.g. calcium) which cause hard water with other ions (e.g. sodium) which do not cause hard water, reverse osmosis unit physically removes pollutants (e.g. silicate, nitrate) and hardness components from the water. In a reverse osmosis unit, the water runs through a semipermeable membrane at the residential pressure in water lines of 2 − max. 6 bar. The substances (pollutants, salts or hardness components) which have dissolved in the water are unable to pass the fine lattice structure of the membrane and remain in the residual water. This residual water is discharged as concentrate and can easily be used for cleaning, watering or as service water. The downstream ultrapure water filter removes even the smallest residues in the permeate (process water of a reverse osmosis unit) and indicates the exhaustion state of the exchanger (Duresin RI) by changing colour from blue to green. With the PWT (pure water tester), the water quality of the permeate (process water) can be easily checked at any time.
Scope of delivery: RO 600 mounted and ready for use with 5 µm sediment filter, carbon filter, membrane and ultrapure water filter PWT (digital pure water tester) 3 x 2 m hose 3/4 inch tap connection flow limiter with built-in flush valve wall bracket hose plug housing key for filter and membrane housing instructions for use
Technical data:
Output approx. 600 l / day, varies by quality and pressure of the supply water
Average output: 500 − 650 l / day at 8 − 15° C and 3 − 6 bar pressure
Ratio of concentrate to permeate: 1 : 1 (depending on supply water quality)
The average retention rate of the membrane is 90 − 98 %
Aluminium 97 - 98 %
Cadmium 95 - 98 %
Bacteria 99 %
Nitrate max. 90 %
Silicate max. 90 %
Sulphate 97 - 98 %
Hardeners 95 - 98 %
The additional ultrapure water filtration reduces the remaining polluting substances in the permeate by another 99 %. The initial value measured by the pure water tester should be 000 ppm when using new ultrapure water resin.
Spare parts | |
---|---|
80542 | RO 600 replacement membrane |
80551 | Replacement 5 µm sediment filter RO 270 / 300 /600 |
80552 | Replacement carbon filter RO 270 / 300 /600 |
80541/6 | Flow limiter with flush valve RO 600 |
80545/7 | Membrane housing gasket kit RO 200 / 300 / 600 |
80519 | 3/4 inch tap connection |
80549/11 | Membrane housing key RO 300 / 600 |
80549/7 | Filter housing gasket RO 300 / 600 |
80561 | Duresin RI ultrapure water resin refill pack 1 l |
80541/7 | Empty ultrapure water filter cartridge 700 ml |
80543 | PWT (digital pure water tester) |
Optional accessories | |
---|---|
80500 | Filter housing FG 500 |
80512 | Silicate filter |
80513 | Nitrate filter |
80520 | Aqua magnetic valve |
Downloads
We recommend
Siliphos freshwater
Phosphate and silicate remover